The PTU-D100 is a family of mid-size pan-tilt units that provide accurate real-time positioning of cameras, lasers, antenna, or other payloads up to 25 lbs. The PTU-D100 model family are fully weatherized, offer continuous pan rotation, integrated controller, internal wiring for payload signals, and are designed for harsh environments in fixed and mobile applications.
Feature
Benefit to OEM's and Systems Integrators
Complete and proven control interface; Flexible mounting for single and multi-part payloads; Built-in RS-232/485
Reduce development/integration time
Proven system component; headroom for broad feature set
Minimize technical risk
High level, full-featured real-time command protocol
Speed time to market
Low-cost, off-the-shelf solution readily available; Fast integration with other system elements
Minimize development cost
Rugged design; Supports 100% duty cycles
Lower cost of operation
Fully sealed, weatherized design (IP66); Wide temperature ranges.
The PTU-D100 model family of mid-sized computer-controlled pan-tilts are designed for a wide range of outdoor fixed and mobile applications. They are compact, light weight (18.5 lbs), and rugged and offer an off-the-shelf solution for positioning of any type of small sensor or other payload.
The PTU-D100 models utilize stepper motors with an asymmetrical worm-gear design. The body of the pan-tilt is constructed from machined aluminum and provides very rigid, repeatable positioning. The controller is fully integrated and the units provide a single weatherized mil-style connector for power, pan-tilt and payload signals.
Payloads can be mounted on the sides and/or top (multiple bracket configurations available).
The inertial stabilization module (ISM
) configuration uses an integrated gyro to actively control the pan-tilt to maintain the current pointing angle. This provides for improved camera images and communications links to be maintained from moving platforms including ground vehicles, boats, and aircraft. A real-time control interface is available through the ISM to support user joystick control, tracking and other applications in stabilized mode.
The built-in command set offers both ASCII and binary formats. This command set supports real-time control at up to 60 commands/second with very low and predictable latencies. The rich command set provides fine-grained control of position (absolute and relative), velocity, acceleration and other unit functions. The optional Geo-Pointing Module
also provides an Ethernet/IP interface for control of the pan-tilt units.
